*******************************************************************
*                                                                 *
*       ECGDemo - Detect QRS patterns in sampled ECG data         *
*                                                                 *
*      Use a time-delay neural network created with SynWorks      *
*                                                                 *
*                                                                 *
*                                                                 *
*******************************************************************

Note: This is the latest demo added to the SynWorks package.
      It requires Kickstart 2.x or 3.x to run.

The ECG data a read from a file. They have been sampled with a 
frequency of 40 Hz. This is the time base the heart beat rate is
calculated from. ECGDemo does not use the actual time between
two peeks, which wouldn't make sense when reading from files.
Nevertheless, this could easily be added when connecting such 
a device to a real patient monitor.

The vertical bars appearing on top of the frame show the sampling
point where the network detected the QRS pattern.

Have fun !

*******************************************************************

This program was created using SynWorks and the syncode.lib. 
As long as the files "ECGDemo", "ECGDemo881", "ECGDemo.readme",
"ECGData.inp", and "ECGDemo.nwk" are kept together 

AND NO OTHER PROGRAM BELONGING TO THE SYNWORKS PACKAGE IS 
           INCLUDED IN THE DISTRIBUTION,

the five files mentioned above may be freely distributed.
This does NOT affect restrictions given by the copyright, which
remains at Michael Kaiser.

SynWorks and SynCode are copyyright © 1992 by Michael Kaiser.

              For information, please contact:

                           Michael Kaiser
                       Rintheimer Strasse 59
                 D-7500 Karlsruhe 1, West Germany
                    Phone: (+49) (721) 61 18 19
                     E-Mail: kaiser@ira.uka.de