From megalith!CSAA2@uunet.UU.NET Mon Jan 24 23:36:44 1994 Received: from relay2.UU.NET by toadflax.cs.ucdavis.edu (4.1/UCD.CS.2.4) id AA14975; Mon, 24 Jan 94 23:36:41 PST Received: from spool.uu.net (via LOCALHOST) by relay2.UU.NET with SMTP (5.61/UUNET-internet-primary) id AAwaio08135; Tue, 25 Jan 94 02:36:29 -0500 Received: from megalith.UUCP by uucp5.uu.net with UUCP/RMAIL (queueing-rmail) id 023432.19279; Tue, 25 Jan 1994 02:34:32 EST Received: by megalith.miami.fl.us (V1.16.20/w5, Dec 29 1993, 21:22:55) id <0cgf@megalith.miami.fl.us>; Tue, 25 Jan 94 01:31:01 EST -0500 Date: Tue, 25 Jan 94 01:31:01 EST -0500 Message-Id: <9401250130.0cge@megalith.miami.fl.us> Sender: errors@megalith.miami.fl.us Errors-To: errors@megalith.miami.fl.us Warnings-To: warnings@megalith.miami.fl.us Return-Path: errors@megalith.miami.fl.us Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Reply-To: dan@chaos.mcs.mu.edu (Dan Milling) Message-Number: 677 Newsgroups: comp.sys.amiga.announce Message-Id: From: dan@chaos.mcs.mu.edu (Dan Milling) (CSAA) To: announce@megalith.miami.fl.us Subject: RenderCalc v1.41 Status: RO TITLE RenderCalc VERSION V1.41 (First Release) AUTHOR Daniel S. Milling Jr. (dan@chaos.mcs.mu.edu) or (milling@studsys.mscs.mu.edu) DESCRIPTION RenderCalc v1.41 incorporates three tools into one program: - FRAME CALCULATOR: The ability to calculate the number of animation frames needed to represent a moving object of known speed and known linear distance travelled relative to any one of the three supported time code formats. - UNITS CONVERTER: The ability to quickly and easily convert numbers between different common units of length. - TIMECODE CALCULATOR: The ability to easily and quickly calculate Time Code durations from IN and OUT points and also to calculate a timecode OUT point from an IN point and a duration. These conversions may be done interchangeably between the three supported time code formats. Some feature of the program are: o Ability to enter values for Speed and Distance and receive output telling you how many total frames, seconds, minutes and the length of time, in the specified timecode format, that the motion will take. o Table of conversions between units of length. Supported units are inches, feet, yards, miles, millimeters, meters and kilometers. o Ability to change the units of ANY inputted number and have all of the values update, relative to the new units, on the fly. This saves having to re-enter the values again. o SMPTE non-drop frame, EBU and Film time code formats supported. o Ability to enter Timecode In and Out points as well as a Duration. The time code input has two modes of operation. You may enter Timecode In and Timecode Out points which results in Duration being the final output value. You may also enter a Timecode In and a Duration which will give you the Timecode Out as your final value. o Ability to change the Timecode Type 'on the fly.' This means that you may switch between the supported time code formats and see the updated results immediately without having to re-enter the values. o Keyfile system which allows for easy registration. Upon registration, you will receive a personalized ASCII keyfile which will permanently remove ALL instances of the Shareware Notice for this and all future revisions of the program. o Many more, listed in the doc file. SPECIAL REQUIREMENTS - OS 2.04 (V37+) or higher. - asl.library version 37 or above (38 or above is recommended) HOST NAME Any Aminet site such as ftp.wustl.edu (128.252.135.4) etc... DIRECTORY /pub/aminet/os20/util FILE NAME RCalc141.lha PRICE If, after 30 days, you find this program useful, please consider sending in the Shareware registration fee of $15. DISTRIBUTABILITY RenderCalc is a Shareware program. The RenderCalc program, the distribution materials and the registration keyfiles are Copyright (c) 1994 Daniel S. Milling Jr. All Rights Reserved. RenderCalc is freely redistributable in it's original form to any bulletin board, public domain software collection, or network system as long as the original archive is kept intact in it's entirety and remains unaltered and as long as no fee, other than nominal media cost, is charged for distribution. The keyfiles which are sent to registered users may NOT be distributed. This program, in whole or in part, may not be included in any commercial package without the prior written consent of the author. -- **************************************************************************** Daniel S. Milling Jr. "Let's go current jumping, decode the matrix dan@chaos.mcs.mu.edu keys, plug in a virus, spreading out in the MILLING@STUDSYS.MSCS.MU.EDU system, there's a hole in the network, there's blackout on the wire." -Chemlab -- Read all administrative posts before putting your post up. Mailing list: announce-request@cs.ucdavis.edu. Comments to CSAA@megalith.miami.fl.us. MAIL ALL COMP.SYS.AMIGA.ANNOUNCE ANNOUNCEMENTS TO announce@cs.ucdavis.edu. ==================================================================== This is part of a mailing list gateway maintained by Carlos Amezaga. Bugs, Comments, Subscribes and UnSubcribes should be sent to announce-request@cs.ucdavis.edu.