*:MSGHDR_1 ================================================================================ Received: from SEARN.SUNET.SE by bi.no (Mailer R2.07) with BSMTP id 5779; Mon, 07 May 90 23:35:02 CET Received: by SEARN (Mailer R2.05) id 9344; Mon, 07 May 90 23:35:37 O Date: Mon, 7 May 90 21:36:30 EET Reply-To: Info-Amiga List Sender: Info-Amiga List From: mea@MEA.UTU.FI Subject: Re: Renewal of your subscription to list I-AMIGA To: Espen Outtasight Lyngaas In-Reply-To: <9005071913.AA19769@mea.utu.fi>; from "nop" at May 7, 90 11:11 am > CONFIRM I-AMIGA Before everybody sends CONFIRMs to LIST, let it be known that that confirmation request sent to list was due to badly done peering which didn't cause hickups before... Basically name of peered list MUST BE EXACTLY 'Peer Distribution List' but it was '"Peer Distribution List"' in I-AMIGA@UTARLVM1 against I-AMIGA@RUTVM1. Those "real names" aren't exactly same, and thus otherwise working peer was considered to be some odd subscriber... It is being considered that whole I-AMIGA should be dragged to single site and other peers to be removed entirely. With 'modern' LISTSERV DIST2 method it uses whole network of LISTSERVs to make nearly optimal distribution of mails in every case. To minimize maintance headaches this consentration would be best for me. (Multiple peers is relict from times before DIST2 method which came into LISTSERVs around -88) Selecting that site isn't done yet. /Matti Aarnio OH1MQK *:MSGHDR_2 ================================================================================ Received: from SEARN.SUNET.SE by bi.no (Mailer R2.07) with BSMTP id 5789; Tue, 08 May 90 01:02:30 CET Received: by SEARN (Mailer R2.05) id 0319; Tue, 08 May 90 01:03:02 O Date: Mon, 7 May 90 13:34:11 CDT Reply-To: Info-Amiga List Sender: Info-Amiga List From: FINEBERG@WUMS2.WUSTL.EDU Subject: Subscription Renewals To: Espen Outtasight Lyngaas Please read your renewal form before just blindly replying to it. Send a message containing "confirm i-amiga" to LISTSERV@RUTVM1 (or whichever peer you are connected to). Please do not send this notice to I-AMIGA@RUTVM1! No one will be any better off for it. Charlie Fineberg BITNET: FINEBERG@WUMS Wash. U. School of Medicine internet: fineberg@wums2.wustl.edu *:MSGHDR_3 ================================================================================ Received: from SEARN.SUNET.SE by bi.no (Mailer R2.07) with BSMTP id 5791; Tue, 08 May 90 01:03:17 CET Received: by SEARN (Mailer R2.05) id 0344; Tue, 08 May 90 01:03:42 O Date: Fri, 4 May 90 18:24:00 EST Reply-To: Info-Amiga List Sender: Info-Amiga List From: D_BLEZARD@UNHH Subject: comp.sys.amiga.* To: Espen Outtasight Lyngaas I don't know of any redistribution lists for comp.sys.amiga on Bitnet (let me know if one exists please, though), but the comp.sys.amiga.tech and comp.sys.amiga.hardware new lists are redistributed through LISTSERV@DHURZ1 (that a one not an 'l'). If you are interested, a subscribe command to the listserv. The two lists are called CSAMIGA and AMIGAHAR. Be warned, the discussions are often very technical especially on .tech [Sort of makes sense doesn't it 8-)], and you will get a LOT, repeat LOT of mail. I'm currently receiving somewhere around 35-40 pieces of mail daily just from these two lists. There's probably no better source for Amy info though especially on programming and hardware problems unless you have a direct phone line to Dave Haynie who happens to post quite a bit to the newsgroups. BCNU, / \ ( ) /_\ Acer David Blezard // d_blezard@unhh.bitnet \X/ *:MSGHDR_4 ================================================================================ Received: from SEARN.SUNET.SE by bi.no (Mailer R2.07) with BSMTP id 5795; Tue, 08 May 90 01:09:22 CET Received: by SEARN (Mailer R2.05) id 0428; Tue, 08 May 90 01:09:59 O Date: Mon, 7 May 90 12:41:50 EDT Reply-To: Info-Amiga List Sender: Info-Amiga List From: "Will Dieterich;SCC;" Subject: Connection Problems To: Espen Outtasight Lyngaas >From David Blezard (d_blezard): >me know if one exists please, though), but the comp.sys.amiga.tech and >comp.sys.amiga.hardware new lists are redistributed through LISTSERV@DHURZ1 >kthat a one not an 'l'). Can you give me more information on the address used to connect to this site? I have been tring various locations and none know of DHURZ1. Thanks, Will Dieterich wdieteri@wrdis01.af.mil *:MSGHDR_5 ================================================================================ Received: from SEARN.SUNET.SE by bi.no (Mailer R2.07) with BSMTP id 5797; Tue, 08 May 90 01:11:21 CET Received: by SEARN (Mailer R2.05) id 0457; Tue, 08 May 90 01:11:44 O Date: Mon, 7 May 90 16:19:00 EST Reply-To: Info-Amiga List Sender: Info-Amiga List From: DSR@CRNLNS Subject: Re: DECWindows To: Espen Outtasight Lyngaas Comment: forwarded by CRNLNS/FMAIL v2.0 Comment: REPLY may not work. Comment: Network-Source: _LNS62::DSR (HEPnet/SPAN) Comment: Originally-From: DSR "Dan Riley" Comment: Originally-To: JNET%"i-amiga@ubvm" >There is a version of X Windows for the Amiga by a company named GfxBase, >I don't know anything more except that it requires an Ethernet conncection. GfxBase is owned and operated by Dale Luck, one of the longtime Amiga software guys. It will run X11 locally, since you can run both the server and clients on an Amiga (thanks to multitasking). GfxBase sells the AmeriStar (soon to be re-released by Commodore) EtherNet card, and I believe Dale has been working with the TSSNet(?) guys to get Amiga X11 working with their implementation of DECnet, so you can run X11 with DECnet as the transport layer using a serial line or a supported Ethernet card. -Dan Riley (dsr@crnlns) -Wilson Lab, Cornell University *:MSGHDR_6 ================================================================================ Received: from SEARN.SUNET.SE by bi.no (Mailer R2.07) with BSMTP id 5846; Tue, 08 May 90 03:03:30 CET Received: by SEARN (Mailer R2.05) id 1497; Tue, 08 May 90 03:04:06 O Date: Tue, 8 May 90 08:08:02 SST Reply-To: Info-Amiga List Sender: Info-Amiga List From: "S. Sujarittanonta" Subject: Hello from Singapore! To: Espen Outtasight Lyngaas In-Reply-To: Message of Mon, 7 May 90 12:41:50 EDT from Hello from SIngapore, In reply to the LISTSERV address for com.sys amiga.hardware and com.sys.amiga. tech. is not DHURZ1 as mentioned here. I manage to subscribe to both by sendin g the SUBscribtion message to LISTSERV@DHDURZ1 (Please not that there is an ext ra D between H and U). Name of Discussion group in Listserv is CSAMIGA for the com.sys.amiga.tech and AMIGAHAR for the com.sys.amiga.hardware. Regards, Suthipunha, School of Architecture , National University of Singapore *:MSGHDR_7 ================================================================================ Received: from SEARN.SUNET.SE by bi.no (Mailer R2.07) with BSMTP id 5848; Tue, 08 May 90 03:03:58 CET Received: by SEARN (Mailer R2.05) id 1516; Tue, 08 May 90 03:04:30 O Date: Mon, 7 May 90 19:36:00 EST Reply-To: Info-Amiga List Sender: Info-Amiga List From: D_BLEZARD@UNHH Subject: New AMax To: Espen Outtasight Lyngaas As I heard last week from our local dealer and user's group president, the new version of AMax will have harddrive support with C= and GVP controllers. Currently, I believe that there's a way to do it with TrumpCard, but I'm not completely sure on that (Anyone, anyone...?). I don't know whether the new AMax will have any other new features like Mac sound support, but they had better have made it work with 2.0 and the new chip set! As to when it will be out, the best I can say is soon. My guess is, though, that it will appear some time around when the A3000 starts to ship or shortly there after. / \ ( ) David Blezard // /_\ Acer d_blezard@unhh.bitnet \// *:MSGHDR_8 ================================================================================ Received: from SEARN.SUNET.SE by bi.no (Mailer R2.07) with BSMTP id 5995; Wed, 09 May 90 03:09:13 CET Received: by SEARN (Mailer R2.05) id 6693; Wed, 09 May 90 03:09:52 O Date: Tue, 8 May 90 11:14:00 MET Reply-To: Info-Amiga List Sender: Info-Amiga List Comments: Sent using PMDF-822 V3.1, routing is done by SARA5 From: Robert Belleman Subject: Re: DECWindows To: Espen Outtasight Lyngaas > >There is a version of X Windows for the Amiga by a company named GfxBase, > >I don't know anything more except that it requires an Ethernet conncection. > > GfxBase is owned and operated by Dale Luck, one of the longtime Amiga > software guys. It will run X11 locally, since you can run both the > server and clients on an Amiga (thanks to multitasking). GfxBase sells > the AmeriStar (soon to be re-released by Commodore) EtherNet card, and > I believe Dale has been working with the TSSNet(?) guys to get Amiga X11 > working with their implementation of DECnet, so you can run X11 with DECnet > as the transport layer using a serial line or a supported Ethernet card. I think there was a distribution of X11 on Usenet a little while ago, but I missed it for some reason; I can't remember why. Does anyone know where I can FTP this thingie from ? For some reason I can not FTP from uunet, so that's no use (for me, that is). > -Dan Riley (dsr@crnlns) > -Wilson Lab, Cornell University -- Rob Robert Belleman, co-system-manager the Netherlands Cancer Institute Amsterdam. Tel. : (31) 20-5122458 Home number : (31) 2206-1789 ROBBEL@VAXH.NKI.NL PSI%02041291011::ROBBEL *:MSGHDR_9 ================================================================================ Received: from SEARN.SUNET.SE by bi.no (Mailer R2.07) with BSMTP id 6001; Wed, 09 May 90 03:17:13 CET Received: by SEARN (Mailer R2.05) id 6794; Wed, 09 May 90 03:18:03 O Date: Tue, 8 May 90 07:29:34 MEX Reply-To: Info-Amiga List Sender: Info-Amiga List From: Marvin Nahmias Subject: IBM KEYBOARD To: Espen Outtasight Lyngaas Hi guys, i need to know which keymap or what i can do to configure the amiga keyboard exactly as an ibm pc or ps, like when i press home, i get home and not number 7, i need this to connect correctly to my host on campus via mode, or any term program for ibm 3270 tha can configure the keys, i tried aftterm and ami3270, which work fine but return an undifined keyboard sequence. MARV *:MSGHDR_10 ================================================================================ Received: from SEARN.SUNET.SE by bi.no (Mailer R2.07) with BSMTP id 6003; Wed, 09 May 90 03:18:05 CET Received: by SEARN (Mailer R2.05) id 6819; Wed, 09 May 90 03:18:30 O Date: Tue, 8 May 90 07:21:45 MEX Reply-To: Info-Amiga List Sender: Info-Amiga List From: Marvin Nahmias Subject: IBM 3270 To: Espen Outtasight Lyngaas Hi, soory to bother you again, but i need a favor. I already downloaded Ami3270 and aftterm and i do connect to my host in school but they only configured it to run on a ps with ftterm, the problem is the CLEAR key is configured as home key on the ps, but when i put ctfl c in aftterm it gives me a error that the key sequence does not exist, how can i alter a program or is there a program to make the amiga keyboard exactly as the ps or a term prog to configure keys. I emulate ibm and communicate but is darn to slow. PLEASE HELP AND MAIL PERSONALLY PLEASE. ANY ANSWER WILL BE APPRECIATED and is someone has the same problem and i get it solved ill post it. MARV *:MSGHDR_11 ================================================================================ Received: from SEARN.SUNET.SE by bi.no (Mailer R2.07) with BSMTP id 6005; Wed, 09 May 90 03:19:41 CET Received: by SEARN (Mailer R2.05) id 6844; Wed, 09 May 90 03:20:21 O Date: Tue, 8 May 90 18:21:15 MEZ Reply-To: Info-Amiga List Sender: Info-Amiga List From: Konrad Neuwirth Subject: Listserv To: Espen Outtasight Lyngaas In-Reply-To: Message of Mon, 7 May 90 12:41:50 EDT from The listserv is at DHDURZ1, an EARN/BITNET node. Konrad Neuwirth The friendly listowner of CSAMIGA and AMIGAHAR *:MSGHDR_12 ================================================================================ Received: from SEARN.SUNET.SE by bi.no (Mailer R2.07) with BSMTP id 6007; Wed, 09 May 90 03:22:10 CET Received: by SEARN (Mailer R2.05) id 6871; Wed, 09 May 90 03:22:22 O Date: Tue, 8 May 90 10:33:00 EST Reply-To: Info-Amiga List Sender: Info-Amiga List From: D_BLEZARD@UNHH Subject: SOOORRRRYYYYYYY!!!! To: Espen Outtasight Lyngaas > I don't know of any redistribution lists for comp.sys.amiga on Bitnet (let >me know if one exists please, though), but the comp.sys.amiga.tech and >comp.sys.amiga.hardware new lists are redistributed through LISTSERV@DHURZ1 >(that a one not an 'l'). The typo struck again. The listserv is located at DHDURZ1. ^ I'm sure that will work a lot better. ^ ^ My Sincere Appologies, ^ ^ / \ ( ) /_\ Acer David Blezard // d_blezard@unhh.bitnet \X/ *:MSGHDR_13 ================================================================================ Received: from SEARN.SUNET.SE by bi.no (Mailer R2.07) with BSMTP id 6009; Wed, 09 May 90 03:22:52 CET Received: by SEARN (Mailer R2.05) id 6924; Wed, 09 May 90 03:23:27 O Date: Tue, 8 May 90 15:09:40 BST Reply-To: Info-Amiga List Sender: Info-Amiga List From: "Dr. Frank Kvasnik" Subject: Setting up To: Espen Outtasight Lyngaas Not a very technical question but still it's got me stuck so I've downloaded a few file from FINTUVM and UUDECODEd and ZOOd them Ok. the problem occurs when I try to run them eg. the omega version on Fred Fish disk 320 has an icon 'Click me to run' which if I click flashs up an error message about 'c/Xicon' which I assume means it can't find Xicon. But I've got Xicon and MuchMore in my c directory - the MuchMore because similar problems arise when I click on the readme files associated with these programs. In a similar vein can anyone direct me to information on how these '.info' files work. Also does anyone have the info on any Fred Fish disk from 340 onwards? Thanks for any help Steve C. *:MSGHDR_14 ================================================================================ Received: from SEARN.SUNET.SE by bi.no (Mailer R2.07) with BSMTP id 6108; Wed, 09 May 90 10:40:46 CET Received: by SEARN (Mailer R2.05) id 0772; Wed, 09 May 90 10:37:47 O Date: Wed, 9 May 90 00:46:51 EDT Reply-To: Info-Amiga List Sender: Info-Amiga List From: Tom J Hayko Subject: Re: comp.sys.amiga.* To: Espen Outtasight Lyngaas I've been told that AMIGA-D is a list that echos comp.sys.amiga. You can subscribe by sending the usual message to LISTSERV@FINTUVM.BITNET. Tom *:MSGHDR_15 ================================================================================ Received: from SEARN.SUNET.SE by bi.no (Mailer R2.07) with BSMTP id 6194; Thu, 10 May 90 01:15:04 CET Received: by SEARN (Mailer R2.05) id 8706; Thu, 10 May 90 01:15:55 O Date: Tue, 8 May 90 17:37:48 GMT Reply-To: Info-Amiga List Sender: Info-Amiga List From: "Olaf Marx +49 (0)541 75624" Subject: CSAMIGA To: Espen Outtasight Lyngaas Hello everybody, CSAMIGA can be subscribed from DHDURZ1 (there was just a 'D' missing !). So send your subscribtion command to LISTSERV@DHDURZ1. (The node is in Heidelberg,FRG). Olaf *:MSGHDR_16 ================================================================================ Received: from SEARN.SUNET.SE by bi.no (Mailer R2.07) with BSMTP id 6196; Thu, 10 May 90 01:15:23 CET Received: by SEARN (Mailer R2.05) id 8726; Thu, 10 May 90 01:16:15 O Date: Wed, 9 May 90 09:50:34 EDT Reply-To: Info-Amiga List Sender: Info-Amiga List From: "Will Dieterich;SCC;" Subject: Troubles with FTP To: Espen Outtasight Lyngaas I am having trouble transfering files from a FTP network, and then having them work. I am currently geting the files in an arc, or zoo format, from the FTP connection to the UNIX system that I am on. I then transfer them to my Amiga by use of kermit. The problem is that the files I get back to the Amiga are all garbage. This has happened with all of the files I have downloaded. Is there some program I sould be running on the UNIX system to fix them, ( I do have FTP set for type binary)? Or could it be that all the files I have received have been corrupted. The error is with the CRC. *:MSGHDR_17 ================================================================================ Received: from SEARN.SUNET.SE by bi.no (Mailer R2.07) with BSMTP id 6198; Thu, 10 May 90 01:15:45 CET Received: by SEARN (Mailer R2.05) id 8747; Thu, 10 May 90 01:16:33 O Date: Wed, 9 May 90 12:47:00 EDT Reply-To: Info-Amiga List Sender: Info-Amiga List From: SUTTON@BRANDEIS Subject: RE: Setting up To: Espen Outtasight Lyngaas First of all, do you mean Xicon or IconX? Second, look at the filename in your error message. It's trying to find a directory off the current directory call "c" and a file called "Xicon". If such a thing doesn't exist (and I'm assuming that it doesn't), you need to select the icon and Info from the first Workbench menu. You'll then get the Info requestor for that icon. Under "Default Tool", type something like "C:Xicon" (or "C:IconX") --- that is, the path and file of the program that it's trying to find. This is the default program that's run when a project is started up (double clicked). Not a bad question... It's not entirely obvious how that stuff works. On the Mac, that kind of book-keeping is done for you automatically --- of course, when you're that insulated from the workings of the machine, you give up a lot in flexibility. SUTTON@BRANDEIS.BITNET *:MSGHDR_18 ================================================================================ Received: from SEARN.SUNET.SE by bi.no (Mailer R2.07) with BSMTP id 6354; Thu, 10 May 90 15:01:24 CET Received: by SEARN (Mailer R2.05) id 5843; Thu, 10 May 90 15:02:03 O Date: Thu, 10 May 90 08:01:56 BST Reply-To: Info-Amiga List Sender: Info-Amiga List From: "Dr. Frank Kvasnik" Subject: Xicon/Muchmore To: Espen Outtasight Lyngaas Thanks to all those people who sent me mail on the problem I had with Xicon and MuchMore. I tried your suggestions and its worked fine. Steve C. *:MSGHDR_19 ================================================================================ Received: from SEARN.SUNET.SE by bi.no (Mailer R2.07) with BSMTP id 7625; Mon, 21 May 90 06:22:42 CET Received: by SEARN (Mailer R2.05) id 2754; Mon, 21 May 90 06:15:20 O Date: Sun, 20 May 90 20:54:00 PDT Reply-To: Info-Amiga List Sender: Info-Amiga List From: James Miller Subject: Help on Caligari and other Raytracers!! To: Espen Outtasight Lyngaas I have been writing a raytracer and some other graphic utilities to create photorealistic images. I would like to import some of the scene files from other packages to test my algorithms. I was wondering if anyone out there has access to the the format of the scene and object description files for Caligari. Unfortunately, with a mere college student budget, I don't have the package, but have to pick up my images from a rich friend!! I am planning to write a few conversion utilities to convert between Caligari and some of the more popular ( and cheaper!! ) raytracing packages out there, such as Sculpt 3d, TurboSilver, and Opticks for the public (shareware) domain. Any information (or source code) for this format or any other format would be greatly appreciated!! Thank you!! Please respond to one of the addresses below, as my school no longer has a subscription to this list. Jim Miller -------------------------------------------------------------------------------- James B. Miller BITnet : JMILLER@SCU.BITNET Box 2733 InterNet: JMILLER@SCUACC.SCU.EDU Santa Clara University JMILLER%SCU.BITNET@JADE.BERKELEY.EDU Santa Clara, CA 95053-2733 UUCP : JMILLER%SCUACC.SCU.EDU@AMES.ARC.NASA.GOV Home: (408) 985-3686 JMILLER%SCU.BITNET@AMES.ARC.NASA.GOV Work: (408) XXX-XXXX Compuserve: >INTERNET: JMILLER@SCU.BITNET DECWRL: "DECWRL!SCU.BITNET!JMILLER@DECVAX"@DECWRL.DEC.COM --------------------------------------------------------------------------------