**************************************************************** * NOTES: Include this file where the subroutines are to go. * This way, the subroutines and macros may be * kept together in this file. * * by Larry Phillips (1986) * **************************************************************** *----- EQUATES -----* AbsBase EQU 4 *-------------------* SECTION CODE IFD libs XTRN OpenLibrary XTRN CloseLibrary **************************************************************** * * openlib * * ROUTINE TYPE: MACRO with SUBROUTINE * * SYNTAX: openlib name,pointer * name = address of library string name * pointer = address to store returned library pointer * * ENTRY CONDITIONS: None * * RETURNS: Pointer to library in D0: = 0 if unsuccessful * Pointer to library in 'pointer' * * USAGE: openlib dosname,dosbase * beq errorexit * **************************************************************** exit MACRO ;leave program with return code \1 move.l \1,d2 jmp do.close ENDM dolibs MACRO jsr do.libs ENDM openlib MACRO ;opens an individual library lea \1,a1 ;name of library bsr openit move.l d0,\2 ;store pointer ENDM closelib MACRO move.l \1,a1 ;pointer to library bsr closeit ENDM setlib MACRO move.l \1,a6 ;pointer to library ENDM ******************************** * Open all pertinent libraries ******************************** CNOP 0,4 do.libs IFD doslib openlib dosname,dos beq exitlib ENDC IFD intlib openlib intname,int beq exitlib ENDC IFD gfxlib openlib gfxname,gfx beq exitlib ENDC IFD dfontlib openlib dfontname,dfont beq exitlib ENDC IFD clistlib openlib clistname,clist beq exitlib ENDC IFD layerslib openlib layersname,layers beq exitlib ENDC IFD ffplib openlib ffpname,ffp ENDC IFD translib openlib transname,trans ENDC IFD mathdoublib openlib doublename,double ENDC IFD speechlib openlib speechname,speech ENDC IFD iconlib openlib iconname,icon ENDC exitlib rts ************************************************************************ * Close all libraries. * NOTE: JSR to this routine if you want to close all libraries and do * some more stuff in the main program. * If you want to leave the progam, use the 'exit' MACRO, and * call with a return code, ie. EXIT 0 ;(good return) ************************************************************************ do.close IFD doslib tst.l dos beq close1 closelib dos close1 ENDC IFD intlib tst.l int beq close2 closelib int close2 ENDC IFD gfxlib tst.l gfx beq close3 closelib gfx close3 ENDC IFD dfontlib tst.l dfont beq close4 closelib dfont close4 ENDC IFD clistlib tst.l clist beq close5 closelib clist close5 ENDC IFD layerslib tst.l layers beq close6 closelib layers close6 ENDC IFD ffplib tst.l ffp beq close7 closelib ffp close7 ENDC IFD translib tst.l trans beq close8 closelib trans close8 ENDC IFD mathdoublib tst.l double beq close9 closelib double close9 ENDC IFD speechlib tst.l speech beq close10 closelib speech close10 ENDC IFD iconlib tst.l icon beq close11 closelib icon close11 ENDC move.l d2,d0 rts *********************************** * Openit. Opens a library ************************************ openit clr.l d0 move.l AbsBase,a6 call OpenLibrary(a6) rts **************************************************************** * * closelib * * ROUTINE TYPE: MACRO with SUBROUTINE * * SYNTAX: closelib pointer * pointer = address of library pointer * * ENTRY CONDITIONS: Must have previously used * * RETURNS: None * * USAGE: closelib dosbase * **************************************************************** closeit move.l AbsBase,a6 call CloseLibrary(a6) rts ENDC ;libs *********************************************************************** * * binhex * * PURPOSE: Convert a binary value in a register to * a hex ASCII string at the destination address * * ROUTINE TYPE: MACRO with SUBROUTINE * * SYNTAX: binhex source,destination * * ENTRY CONDITIONS: None * * RETURNS: ASCII string in destination address * * CHANGED: Nothing * * USAGE: binhex #label,address ;converts the address at label to * ;string at address * binhex label,address ;conv contents at label * * binhex #value,address ;convert immediate value * **************************************************************** IFD b2h binhexb MACRO clr.l d0 move.b \1,d0 lea \2,a0 jsr bin2hex ENDM binhexw MACRO clr.l d0 move.w \1,d0 lea \2,a0 jsr bin2hex ENDM binhex MACRO move.l \1,d0 lea \2,a0 ;address of destination jsr bin2hex ENDM bin2hex move.l a0,-(sp) move.l d2,-(sp) ;preserve d2 move.l #7,d2 ;count to d2 clr.l d1 ;conversion work register bhloop rol.l #4,d0 ;get high order nybble to low order move.b d0,d1 ;low order byte to d1 andi.b #$f,d1 ;isolate low order nybble cmp.b #$0a,d1 ;digit or letter? blt.s bhaddz ;branch if digit add.b #'A'-'0'-$0A,d1 ;offset for letters bhaddz add.b #'0',d1 ;convert to ASCII move.b d1,(a0)+ ;store it and increment address dbf d2,bhloop ;do 8 times move.l (sp)+,d2 ;restore d2 move.l (a7)+,a0 ;restore a0 rts ENDC ;b2h ********************************************************************** * * print * * PURPOSE: Print a string * * ROUTINE TYPE: MACRO * * SYNTAX: print , * * ENTRY CONDITIONS: required * Must have screen handle in stdout * * RETURNS: None * * USAGE: print message,length * ********************************************************************** IFD prt use scnnull print MACRO move.l stdout,d1 move.l \1,d2 ;NOTE: Needs full addressing mode in args move.l \2,d3 call Write(a6) ENDM printz MACRO ;print NULL terminated string move.l stdout,d1 move.l \1,d2 ;address of string move.l d2,a0 ;to a0 for calculation bsr scanull ;count length to first NULL call Write(a6) ENDM ENDC prt IFD scnnull scanull move.l #-1,d3 ;preset for proper count scnuloop: add.l #1,d3 ;count times through here cmp.b #0,(a0)+ ;compare and increment bne.s scnuloop ;go try next rts ;or leave with count in d3 fo Write ENDC ********************************************************************** * * copy * * PURPOSE: MACRO with SUBROUTINE * * ROUTINE TYPE: * * SYNTAX: * * ENTRY CONDITIONS: * * RETURNS: * * USAGE: * ********************************************************************** IFD copy copyb MACRO lea \1,a0 lea \2,a1 move.l \3,d0 jsr docopy ENDM docopy subq.l #1,d0 coploop move.b 0(a0,d0),0(a1,d0) dbf d0,coploop rts ENDC ********************************************************************** * * instr * * PURPOSE: MACRO with SUBROUTINE * * ROUTINE TYPE: MACRO with SUBROUTINE * * SYNTAX: instr
,
,terminator * * ENTRY CONDITIONS: None * * RETURNS: D0 = position of string 1 in string2 * or -1 if string1 not in string2 * * USAGE: instr string1,string2,13 ;terminator is C/R * cmp.b #-1,d0 * beq nomatch ;string1 not in string2 * move.l d0,position ;save position if needed * ********************************************************************** IFD ins use sln use scm instr MACRO move.l \1,a0 ;string 1 move.l \2,a1 ;string 2 move.l #\3,d0 ;terminator jsr instrn ENDM instrn movem.l d1/a0-a1,-(sp) ;preserve addresses and d1 pushl a1 ;for later calculation of position move.l d0,d1 ;terminator to d1 inloop bsr.s strcomp ;go check for match beq.s isin ;got a match adda.l #1,a1 ;adjust string 2 address cmp.b -1(a1),d0 ;check for terminator bne.s inloop ;go try again isntin move.l #-1,d0 ;-1 indicates str1 not in str2 popl a1 ;adjust stack bra.s insexit ;leave isin move.l a1,d0 ;final address of a1 to d0 popl a1 ;initial address of a1 to a1 sub.l a1,d0 ;calculate position of str1 in str2 insexit movem.l (sp)+,d1/a0-a1 ;restore stack (gruesome results otherwise) rts ;that's it ENDC ;ins ********************************************************************** * * cmpstr * * PURPOSE: compare two strings * * ROUTINE TYPE: MACRO with subroutine * * SYNTAX: cmpstr
,
,terminator * * ENTRY CONDITIONS: None * * RETURNS: D0 = terminator if strings compare up to terminator * first non comparing character of first operand * A1 = address of first non comparing character in 2nd operand * * USAGE: cmpstr string1,string2,' ' ;space is end of string * bne nocompare ;strings differ * cmp d0,(a1) ;check for terminator in string1 * beq samestrings ;strings are identical * bne substringok ;string1 is a substring of string2 * * NOTE: This routine is a fairly general one, and may be used in many * ways. If the lengths of the string are not known, you might * * * ********************************************************************** IFD scm strcmp MACRO lea \1,a0 ;address of first string lea \2,a1 ;address of second string move.l #\3,d1 ;terminator jsr strcomp ;do compare ENDM strcomp movem.l d1/a0-a1,-(sp) ;preserve addresses cmloop move.b (a0)+,d0 ;get byte of first string cmp.b d0,d1 ;check for terminator beq.s cmprtn ;branch if terminator (substring compares) ;perhaps entire string cmp.b (a1)+,d0 ;compare to byte of second string beq.s cmloop ;OK.. check next byte cmprtn movem.l (sp)+,d1/a0-a1 ;restore addresses rts ENDC ;scm ********************************************************************** * * strlen * * PURPOSE: To find the length of a string. * * ROUTINE TYPE: MACRO and SUBROUTINE * * SYNTAX: strlen
,terminator * * ENTRY CONDITIONS: None * * RETURNS: D0 = length of string * * USAGE: strlen string,0 ;0 is terminator, can be any value * move.l d0,lengthvar ;store the length if needed * ********************************************************************** IFD sln strlen MACRO lea \1,a0 move.b #\2,d0 jsr slen ENDM slen move.l a0,a1 slnloop cmp.b (a0)+,d0 bne slnloop sub.l a1,a0 move.l a0,d0 subq.l #1,d0 rts ENDC ;sln ********************************************************************** * * regdata * * PURPOSE: Dump all registers to screen * * ROUTINE TYPE: SUBROUTINE * * SYNTAX: jsr regdump * * ENTRY CONDITIONS: None * * RETURNS: Dumps all regs (a0-a7, d0-d7) to screen * * USAGE: jsr regdump * ********************************************************************** IFD dbug regdata dc.b ' D0: ' d0d dc.b '00000000 ' dc.b ' D1: ' d1d dc.b '00000000 ' dc.b ' D2: ' d2d dc.b '00000000 ' dc.b ' D3: ' d3d dc.b '00000000',10 dc.b ' D4: ' d4d dc.b '00000000 ' dc.b ' D5: ' d5d dc.b '00000000 ' dc.b ' D6: ' d6d dc.b '00000000 ' dc.b ' D7: ' d7d dc.b '00000000',10,10 dc.b ' A0: ' a0d dc.b '00000000 ' dc.b ' A1: ' a1d dc.b '00000000 ' dc.b ' A2: ' a2d dc.b '00000000 ' dc.b ' A3: ' a3d dc.b '00000000',10 dc.b ' A4: ' a4d dc.b '00000000 ' dc.b ' A5: ' a5d dc.b '00000000 ' dc.b ' A6: ' a6d dc.b '00000000 ' dc.b ' A7: ' a7d dc.b '00000000',10,10 endump EQU *-regdata CNOP 0,4 regdump movem.l d0-d7/a0-a7,-(sp) popl d0 binhex d0,d0d popl d0 binhex d0,d1d popl d0 binhex d0,d2d popl d0 binhex d0,d3d popl d0 binhex d0,d4d popl d0 binhex d0,d5d popl d0 binhex d0,d6d popl d0 binhex d0,d7d popl d0 binhex d0,a0d popl d0 binhex d0,a1d popl d0 binhex d0,a2d popl d0 binhex d0,a3d popl d0 binhex d0,a4d popl d0 binhex d0,a5d popl d0 binhex d0,a6d popl d0 binhex d0,a7d rts shoregs print #regdata,#endump rts ENDC ********************************************************************** * * doargs ***** Not working ****** * * PURPOSE: * * ROUTINE TYPE: MACRO with SUBROUTINE * * SYNTAX: * * ENTRY CONDITIONS: * * RETURNS: * * USAGE: * ********************************************************************** IFD arg doargs MACRO clr.l d0 move.l args,a0 arg6 cmp.b #' ',(a0) ;space? bne.s arg1 ;no, try another move.b #0,(a0) ;terminate string bra.s arginc ;try next arg1 cmp.b #'"',(a0) bne.s arg2 ;not a quote, try another move.b #0,(a0) ;zero out a quote arg5 cmp.b #'"'+(a0) ;look for the terminating quote bne.s arg4 ;look for linefeed move.l #9,(a0) ;got terminating quote.. zero it bra.s arg6 ;go look at rest of args arg4 cmp.b #10,(a0) bne.s arg5 ;not linefeed, scan more arg2 cmp.b #10,(a0) bne.s arg3 ;Not LF, no more of importance move.b #0,(a0) ;zero out LF bra.s argdone arg3 adda.l #1,a0 ENDC ********************************************************************** * * leadspace * * PURPOSE: replace ASCII zeros with spaces * * ROUTINE TYPE: MACRO with SUBROUTINE * * SYNTAX: ldspc stringaddr,terminator * * ENTRY CONDITIONS: String must be terminated with anything but * an ASCII '0' ($30) * * RETURNS: address of first non '0' (ASCII) byte * * USAGE: ldspc buffer * ********************************************************************** IFD leadspc ldspc MACRO move.l #\1,a0 ;string address bsr doldspc ENDM doldspc cmp.b #'0',(a0) bne endldspc move.b #' ',(a0)+ bra doldspc endldspc: rts ENDC ********************************************************************** * * title * * PURPOSE: * * ROUTINE TYPE: MACRO with SUBROUTINE * * SYNTAX: * * ENTRY CONDITIONS: * * RETURNS: * * USAGE: * **********************************************************************