Major changes in SetFF:

                                                      last revised: 16-Jan-94

 v1.72  Kickstart 3.1 v40.68/A3000 support added.
        FPU-emulation can now be loaded from the Plug&Go ROM.
        Minor bugs corrected.

 v1.71  Kickstart 3.1 v40.62/A3000 support added.

 v1.70  Cleaned up code.

 v1.69  68EC040 support is now completed!
        New option JMP added that will remap all library jump tables at the
        FASTKICK (only with 68EC040).
        (The new Plug&Go v3.1 ROM is required if you have the 68EC040.)

 v1.68  Kickstart 40.55 support corrected. Now it should work.

 v1.67  Kickstart 3.1 v40.55/A3000 support added.
        Problem with VBR fixed (bug in v1.66).

 v1.66  New option added to enable caching and copyback of all ZorroII memory
        boards installed in the machine, use CACHEZIIRAM (see SetFF.doc).
        Now SetFF will be smart when merging memory boards (for compatibility
        with the new board).

 v1.65  Now SetFF will FASTKICK a Fusion-Forty with only 1MB or more mem.
        (Fix for the new board which can have 2..128MB of 32-bit mem.)

 v1.64  Finaly corrected the problems with MULTIPASS.
        Emplant support added. (NOT TESTED)

 v1.63  Kickstart 3.1 v40.38/A3000 support added.
        Generic-patch fixed (didn't work in 1.62 & 1.61 due to MULTIPASS...)

 v1.62  68EC040 detection corrected. (but not supported yet...)

 v1.61  Kickstart 3.1 v40.9/A3000 support added.

 v1.60  Small bug in 2.0 v37.350/A2000 patch corrected.
        Check for a specific Kickstart checksum now possible, use: CHECK
        CHKSUM $xxxxxxxx, where xxxxxxxx is the checksum to check for.

 v1.59  Kickstart 3.1 v40.3/A3000 support added.

 v1.58  SetFF will now print the Kickstart version of Alien- and Generic-
        FASTKICK's.

 v1.57  Kickstart 3.0 v39.115/A3000 support added. Generic patch for any
        A2000 kickstart added.
        Kickstart 2.0 v37.300/A2000 patch has been changed, older SetFF will
        not recognize this patch, the new SetFF will not recognize the old
        one.

 v1.56  LC and EC '040's is now detected. Code optimized.

 v1.54..1.55  Small "bugs" removed.

 v1.53  Added support for Kickstart 3.0 v39.110/A3000.

 v1.52  Finaly corrected the problem with Kickstart 3.0 v39.106/A3000...
        Added support for Kickstart 2.0 v37.350/A2000.

 v1.51  I had a patched KS3.0 v39.106/A3000, and therefor SetFF would
        not load an original 39.106...

 v1.50  This version will handle the new Kickstart release 3.0, version
        39.106 for the A3000.

 v1.42..1.44  Bugs fixed...

 v1.41  Now SetFF is "smart" about how to setup your '040 (MMU, mem etc.).

 v1.40  If you have 8Megs they will be merged into _one_ block instead of two
        blocks of 4Meg each.
        EMACS switch removed since emacs v18.58 can run anyway on the Fusion-
        Forty.

I would appreciate if you get in touch (using the address below) if you find
any bugs (or want to ask me about something). Thanks!


Mattias Lundblad, ML HardSoft


 ML HardSoft
 Attn: Mattias Lundblad
 Gamla Strandavägen 6
 S-393 63 Kalmar
 SWEDEN

 email: td91ml@tintin.hik.se  (internet)

 Phone: +46-(0)480-75093  voice/modem/(fax)


or RCS in Canada:

 RCS Management Inc.
 6955 Boulevard Tachereau Suite 211
 Brossard, Quebec
 J4Z 1A7
 CANADA

 Phone: +1-(514)-926-3755  voice
        +1-(514)-926-3131  FAX
        +1-(514)-871-9881  BBS