#ifndef INTUITION_PREFERENCES_H #define INTUITION_PREFERENCES_H TRUE /*** preferences.h ************************************************************* * * preferences.h main include for c programmers * * $Header: preferences.h,v 33.6 87/08/17 11:03:00 bart Exp $ * * Confidential Information: Commodore-Amiga Computer, Inc. * Copyright (c) Commodore-Amiga Computer, Inc. * Modification History * date : author : Comments * ------ ------ ------------------------------------- * 6-26-87 Dale created this file! * * This used to be in intuition.h, split out to make managable **************************************************************************** * CONFIDENTIAL and PROPRIETARY * Copyright (C) 1985,86,87, COMMODORE-AMIGA, INC. * All Rights Reserved ****************************************************************************/ #ifndef EXEC_TYPES_H #include "exec/types.h" #endif #ifndef DEVICES_TIMER_H #include "devices/timer.h" #endif /* ======================================================================== */ /* === Preferences ======================================================== */ /* ======================================================================== */ /* these are the definitions for the printer configurations */ #define FILENAME_SIZE 30 /* Filename size */ #define POINTERSIZE (1 + 16 + 1) * 2 /* Size of Pointer data buffer */ /* These defines are for the default font size. These actually describe the * height of the defaults fonts. The default font type is the topaz * font, which is a fixed width font that can be used in either * eighty-column or sixty-column mode. The Preferences structure reflects * which is currently selected by the value found in the variable FontSize, * which may have either of the values defined below. These values actually * are used to select the height of the default font. By changing the * height, the resolution of the font changes as well. */ #define TOPAZ_EIGHTY 8 #define TOPAZ_SIXTY 9 #define PREF_EXTBYTES 64 struct Preferences { /* the default font height */ BYTE FontHeight; /* height for system default font */ /* constant describing what's hooked up to the port */ UBYTE PrinterPort; /* printer port connection */ /* the baud rate of the port */ USHORT BaudRate; /* baud rate for the serial port */ /* various timing rates */ struct timeval KeyRptSpeed; /* repeat speed for keyboard */ struct timeval KeyRptDelay; /* Delay before keys repeat */ struct timeval DoubleClick; /* Interval allowed between clicks */ /* Intuition Pointer data */ USHORT PointerMatrix[POINTERSIZE]; /* Definition of pointer sprite */ BYTE XOffset; /* X-Offset for active 'bit' */ BYTE YOffset; /* Y-Offset for active 'bit' */ USHORT color17; /***********************************/ USHORT color18; /* Colours for sprite pointer */ USHORT color19; /***********************************/ USHORT PointerTicks; /* Sensitivity of the pointer */ /* Workbench Screen colors */ USHORT color0; /***********************************/ USHORT color1; /* Standard default colours */ USHORT color2; /* Used in the Workbench */ USHORT color3; /***********************************/ /* positioning data for the Intuition View */ BYTE ViewXOffset; /* Offset for top lefthand corner */ BYTE ViewYOffset; /* X and Y dimensions */ WORD ViewInitX, ViewInitY; /* View initial offset values */ BOOL EnableCLI; /* CLI availability switch */ /* printer configurations */ USHORT PrinterType; /* printer type */ UBYTE PrinterFilename[FILENAME_SIZE];/* file for printer */ /* print format and quality configurations */ USHORT PrintPitch; /* print pitch */ USHORT PrintQuality; /* print quality */ USHORT PrintSpacing; /* number of lines per inch */ UWORD PrintLeftMargin; /* left margin in characters */ UWORD PrintRightMargin; /* right margin in characters */ USHORT PrintImage; /* positive or negative */ USHORT PrintAspect; /* horizontal or vertical */ USHORT PrintShade; /* b&w, half-tone, or color */ WORD PrintThreshold; /* darkness ctrl for b/w dumps */ /* print paper descriptors */ USHORT PaperSize; /* paper size */ UWORD PaperLength; /* paper length in number of lines */ USHORT PaperType; /* continuous or single sheet */ /* Serial device settings: These are six nibble-fields in three bytes */ /* (these look a little strange so the defaults will map out to zero) */ UBYTE SerRWBits; /* upper nibble = (8-number of read bits) */ /* lower nibble = (8-number of write bits) */ UBYTE SerStopBuf; /* upper nibble = (number of stop bits - 1) */ /* lower nibble = (table value for BufSize) */ UBYTE SerParShk; /* upper nibble = (value for Parity setting) */ /* lower nibble = (value for Handshake mode) */ UBYTE LaceWB; /* if workbench is to be interlaced */ UBYTE WorkName[FILENAME_SIZE]; /* temp file for printer */ BYTE sys_reserved1; BYTE sys_reserved2; UWORD PrintFlags; /* user preference flags */ UWORD PrintMaxWidth; /* max width of printed picture in 10ths/inch */ UWORD PrintMaxHeight; /* max height of printed picture in 10ths/inch */ UBYTE PrintDensity; /* print density */ UBYTE PrintXOffset; /* offset of printed picture in 10ths/inch */ UWORD wb_Width; /* override default workbench width */ UWORD wb_Height; /* override default workbench height */ UBYTE wb_Depth; /* override default workbench depth */ UBYTE ext_size; /* extension information -- do not touch! */ /* extension size in blocks of 64 bytes */ BYTE ext_bytes[PREF_EXTBYTES]; }; /* Workbench Interlace (use one bit) */ #define LACEWB 0x01 #define LW_RESERVED1 /* internal use only */ /* PrinterPort */ #define PARALLEL_PRINTER 0x00 #define SERIAL_PRINTER 0x01 /* BaudRate */ #define BAUD_110 0x00 #define BAUD_300 0x01 #define BAUD_1200 0x02 #define BAUD_2400 0x03 #define BAUD_4800 0x04 #define BAUD_9600 0x05 #define BAUD_19200 0x06 #define BAUD_MIDI 0x07 /* PaperType */ #define FANFOLD 0x00 #define SINGLE 0x80 /* PrintPitch */ #define PICA 0x000 #define ELITE 0x400 #define FINE 0x800 /* PrintQuality */ #define DRAFT 0x000 #define LETTER 0x100 /* PrintSpacing */ #define SIX_LPI 0x000 #define EIGHT_LPI 0x200 /* Print Image */ #define IMAGE_POSITIVE 0x00 #define IMAGE_NEGATIVE 0x01 /* PrintAspect */ #define ASPECT_HORIZ 0x00 #define ASPECT_VERT 0x01 /* PrintShade */ #define SHADE_BW 0x00 #define SHADE_GREYSCALE 0x01 #define SHADE_COLOR 0x02 /* PaperSize */ #define US_LETTER 0x00 #define US_LEGAL 0x10 #define N_TRACTOR 0x20 #define W_TRACTOR 0x30 #define CUSTOM 0x40 /* PrinterType */ #define CUSTOM_NAME 0x00 #define ALPHA_P_101 0x01 #define BROTHER_15XL 0x02 #define CBM_MPS1000 0x03 #define DIAB_630 0x04 #define DIAB_ADV_D25 0x05 #define DIAB_C_150 0x06 #define EPSON 0x07 #define EPSON_JX_80 0x08 #define OKIMATE_20 0x09 #define QUME_LP_20 0x0A /* new printer entries, 3 October 1985 */ #define HP_LASERJET 0x0B #define HP_LASERJET_PLUS 0x0C /* Serial Input Buffer Sizes */ #define SBUF_512 0x00 #define SBUF_1024 0x01 #define SBUF_2048 0x02 #define SBUF_4096 0x03 #define SBUF_8000 0x04 #define SBUF_16000 0x05 /* Serial Bit Masks */ #define SREAD_BITS 0xF0 /* for SerRWBits */ #define SWRITE_BITS 0x0F #define SSTOP_BITS 0xF0 /* for SerStopBuf */ #define SBUFSIZE_BITS 0x0F #define SPARITY_BITS 0xF0 /* for SerParShk #define SHSHAKE_BITS 0x0F /* Serial Parity (upper nibble, after being shifted by * macro SPARNUM() ) */ #define SPARITY_NONE 0 #define SPARITY_EVEN 1 #define SPARITY_ODD 2 /* Serial Handshake Mode (lower nibble, after masking using * macro SHANKNUM() ) */ #define SHSHAKE_XON 0 #define SHSHAKE_RTS 1 #define SHSHAKE_NONE 2 /* new defines for PrintFlags */ #define CORRECT_RED 0x0001 /* color correct red shades */ #define CORRECT_GREEN 0x0002 /* color correct green shades */ #define CORRECT_BLUE 0x0004 /* color correct blue shades */ #define CENTER_IMAGE 0x0008 /* center image on paper */ #define BOUNDED_DIMENSIONS 0x0010 /* use max width/height as boundaries */ #define ABSOLUTE_DIMENSIONS 0x0020 /* use max width/height as absolutes */ #define PIXEL_DIMENSIONS 0x0030 /* use max width/height as prtpixels */ #define INTEGER_SCALING 0x0040 /* force integer scaling */ #define HALFTONE_DITHERING 0x0080 /* halftone dithering */ #define CORRECT_RGB_MASK (CORRECT_RED|CORRECT_GREEN|CORRECT_BLUE) #define IGNORE_DIMENSIONS 0x0000 /* ignore max width/height settings */ #define DIMENSIONS_MASK (BOUNDED_DIMENSIONS|ABSOLUTE_DIMENSIONS|PIXEL_DIMENSIONS) #endif