AriadneIIACS V1.4

                               Documentation

              Copyright © 1998 Village Tronic Marketing GmbH




1. Purpose

AriadneIIACS is the AriadneII driver for the "Amiga Client Software" (ACS)
from Oxxi Inc. With AriadneIIACS and ACS from Oxxi you can connect your 
Amiga with an AriadneII to an already installed Novell Netware network.

2. Installation

First install the ACS software from Oxxi. Answer the question "which LAN
board are you using" with "Commodore Ethernet Card (A2065)".

After the ACS installation is finished remove the driver named "Ethernet"
from your Expansion drawer and move the AriadneIIACS driver to your
Expansion drawer. After the next reset, you should be able to log into 
your Novell network.

AriadneIIACS requires that the ariadne_II.device is installed in the drawer
'devs:networks/'.

3. Special Features

AriadneIIACS doesn't use the AriadneII exclusively. You can use Envoy,
AmiTCP and any other SanaII compatible network protocol stack while you
use ACS with AriadneIIACS.

4. Configuration

With the tool type 'Unit' you can specify, which AriadneII board should 
be used, if you have more than one AriadneII board in your machine.
Use "Unit=1" for the second AriadneII etc.

5. History

V1.4    recompiled with SAS/C 6.58 and modified for AriadneII
V1.3    recompiled with SAS/C 6.56

Have fun!

    Village Tronic Marketing GmbH
    Mühlenstr. 2
    D-31157 Sarstedt
    Germany

    Telefon:     (+49) (0)5066 70130
    Fax:         (+49) (0)5066 701349
    EMail:       amigasupport@village.de