@DATABASE "TaskManager V1.0"
@NODE main "TaskManager V1.0 Docs"
@{u}TaskManager Docs V1.0 ©1997 by Steve Clack of Liquid Software Design@{uu}
  
  1.@{" Introduction " LINK intro}
  2.@{" Disclaimer " LINK disclaimer}
 
  3.@{" How to use " LINK use}
  
  4.@{" Credits, Contacts & Greetings " LINK credits}
  5.@{" History " LINK history}

@ENDNODE
@NODE intro "Introduction"
@{u}Introduction@{uu}

   I wrote this little proggy cos I wanted something that let me manage CLI
progs without having to use Status & Break from the CLI, of course, this prog
would be better if it could manage all types of tasks but Exchange manages
Commodities and something like Commander (with Executive) can just about
force close anything but its a little evil. This prog is a GUI for Status 
& Break and a bit of a kludge it is too (sorry!).

   Anyway, have a cruse of this guide, check out all the relevant sections
and stuff, oh and don't forget to contact @{" me " LINK credits 10} if you think
its worth any merit at all!!

@ENDNODE

@NODE "Disclaimer" "Disclaimer & Distribution"
@{u}Licence@{uu}

Licensed to be used free of charge on any system.

This software and accompaning archive must not be altered in any way.
This may only be freely distributed with no additional cost except a small
charge for the media that it is contained on, no charge must be made if 
downloading via modem or ISDN for example.

This is not a GNU public release, but is licensed as 'freeware'.
@{i}
NO WARRANTY 
@{ui}@{b}
THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM,
TO THE EXTENT PERMITTED BY APPLICABLE LAW. STEVE CLACK PROVIDES THIS PROGRAM
"AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING 
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE 
PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST 
OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
  
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW WILL THE COPYRIGHT HOLDER, OR ANY
OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, 
BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR 
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM 
(INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE
OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO
OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.@{ub}
@{i}
END OF TERMS AND CONDITIONS
@{ui}
Additional note: This program has been tested and should not damage your 
system.
@ENDNODE                         

@NODE use "In use"
@{u}In use@{uu}

   Just double click the icon and it'll run, note that if you start it from the
CLI you will Task Manager appear in itself (quite funny that) and you can even
quit it by ending itself!? :)..

   You get a GUI with a listview, several buttons and a menu, here is a list of
what the things to, by the way, even though most things are referred to a
@{i}task, @{ui}it is mearly the CLI process it is running from so infact it is a 
@{i}process... @{ui}

@{b}@{u}The Main Gadgets@{uu}@{ub}

@{b}End @{u}T@{uu}ask@{ub} - Ends the selected task (brings up requester), note that it is up to
           the task if it wants to check to see if a BREAK code has been sent
           so it may not quit!). This is the same as sending a CTRL+C.

@{b}@{u}S@{uu}kip Job@{ub} - Skips the current task's job. Well it doesn't, but that seems to be
           the best way to describe this function, it sends a CTRL+D to the 
           process, if the process is a script then it will quit the script, if
           it is Play16 it will go onto the next sample, if it is SnoopDOS it
           will disable Snooping, etc...)

@{b}@{u}P@{uu}riority@{ub} - Allows you to change the running priority.

@{b}@{u}Q@{uu}uit@{ub} - Quits!

@{i}(the underlined letters are the keyboard shortcut to the key, e.g. Right Amiga
 & T will End the selected task). @{ui}
 
 
@{b}@{u}Menus@{uu}@{ub}

@{i}Much the same as what the buttons do except for the following... @{ui}

@{i}@{b}Task Manager @{ub}@{ui}...

@{b}End commodity@{ub} - Ends the task but only if it is a commodity (and only if it
                accepts a CTRL+E as the terminating code).

@{b}Launch Exchange@{ub} - Runs the program Sys:Tools/Commodities/Exchange, it will also
                  appear in the proccesses list but I haven't been able to quit
                  the version of Exchange I use with TaskManager. :(
                  
@{b}About@{ub} - Shows a little information requester.

@{i}@{b}Window @{ub}@{ui}...

@{b}Snapshot@{ub} - Snapshots the window position, it will open at that position the 
           next time you run TaskManager.
           
@{b}Iconify@{ub} - Shrinks the window, although the keyboard and menu functions will
          still be active, select this again to un-iconify.


@{b}@{u}Keyboard Controls@{uu}@{ub}

All the functions have keyboard shortcuts, in the menu these shortcuts are next
to the menu item (to use hold Right Amiga & the key shown to active item), and
the buttons have underlined letters to indicate the keyboard shortcut, in
additon to these there are even more keyboard controls!

@{b}Up Cursor key@{ub} - Goes up one item in the listview (if it isn't at the top).

@{b}Down Cursor key@{ub} - Same as above except goes down.

@{b}Return / Enter@{ub} - Same as pressing the End task button.

@{b}Escape@{ub} - Quits TaskManager.


   Thats about it really, have fun with your new little program, it doesn't
require much memory or anything but i'll have to warn you that it IS an AMOS
program although you probably won't notice because it has been hacked
considerably and now multitasks safely, if you load SnoopDos you will notice
that TaskManager calls a program called @{i}Ram:BreakName @{ui}every other
second or so, this is to see if the list of processes has changed because it
updates the list, it also uses Ram:BreakName to end tasks and other such
stuff (cheat!). :) have phun, don't forget to contact @{" me " LINK credits 10}!

P.S. Sorry for the shitty window opening, trying to work around that.

@ENDNODE

@NODE Credits "Credits, Contacts & Greetings"
@{u}Credits@{uu}

(c)1997 Steve Clack of Liquid Software Design.

With thanks to Pietro Ghizzoni for the GUI extension for AMOS & to Niki Murkett
for the AMOS multitask patcher (<< yes! AMOS is almost normal at last :)..)

@{u}Contacts@{uu}

I can be reached at:

Total Eclipse BBS: +44(0)1983 522428 - 24 hours - 33.6k - I'm the sysop
Internet E-Mail: steeevc@ndirect.co.uk
FluffyNet: 888:104/0

@{u}Greetings@{uu}

Niki Murkett, Techn!x, Leigh Russ, Dr. X, all the guys on #amiga, #amigacafe
and #liberty (heya!)...
Lots of other people that I forgot on purpose - Because i'm rushing this!!

P.S. If you run a BBS you might like to check out some of my doors, they are
all for MAX's BBS except for one (KewlPage) which may be used on any Paragon
system, these can be found in the comm/maxs directory of the Aminet, and
either begin with Kewl or Magic hehe ;),,

@ENDNODE

@NODE History "History"
@{u}History@{uu}

V1.0 - First version!

@ENDNODE