2) I  used 2MFD's  of  capacitance (two
1MFD's  in  parallel)   Two   R.S.  p/n
272-1055 work fine. Remember that about
90 Volts will appear across red & green
at ring, so the caps should be rated at
100VDC+.

3) I  ended  up  with  a  final  series
resistance  value  (100  ohm + pot)  of
2.75K.  I  speculate  that  one   could
probably  use  2MFD  and  a  fixed 2.7K
resistor and do the job 90% of the time
The adjustment of the pot is  not  very
critical. Changes of +/- 1K made little
difference in the  performance  of  the
circuit.  Hope it works as well for you
as it did for me.

                          Mike McCauley

---------------------------------------
THE LOST BOYS * FACTOR 4 * NUKEBUSTERS
              COPY PARTY
---------------------------------------

 On 21-23 September 1989 the  3rd  copy
party  in  New Zealand was held. It was 
held  in  an  average  sized  house  in
Auckland, NZ owned by Daryn/TLB.The few
people present were 3 members of TLB, 4
from Nukebusters, 4 Factor Four members
and  2   from   New   Zealand   Quality
Distributors  who  travelled  by  plane
from NZs South Island  (Auckland  is in
North Island!).  Also some other people
turned  up  occasionally   during   the
weekend. Krypton/NZ Express arrived but
the lamer was told to piss off  (one of
the  coolest  parts  of  the  party!!!)
 Some  party  activities  were :   Pool
playing, Games playing, Spacies playing
Video watching,  Eating,  Drinking  and
thats  about  it. Most of the new stuff
was  brought by Porsche of Nukebusters.
 The  main  problem  with the party was
lack of people, perhaps  there  will be
another party in NZ....if so heaps more
organising/inviting  needs  to be done.
Even if every member  of every slightly
non-lame  NZ  crew  came there would be
only  about 30 people and at least half
the people would have  already  met  or
talked to each other before.
                             HOUDINI
                               O F
                          THE LOST BOYS